DBRIDGE.PRM+Version 1.30 Single-line / 15 December 1989
DBRIDGE.AUT
DBRIDGE.REG
Importing 'ERROR: Import specified does not exist.0ERROR: Unable to import configuration because...
DBCOSTLU
ABORT the installation?
D'Bridge Installation aborted.U
-Press ESC to abort the installation procedureU
Please wait...
Loading BBS...
DBRIDGE.LOG
UN-EVENT
NCI MESSAGES\
FILES\
PACKETS\
QUEUE\
SCRIPTS\
BADECHO\
ATM0X1Q0V1H0S0=0
*INSTALLATION*-Press any key to begin installation procedureU
$D'Bridge EMAIL System / Version 1.30
!"DEMO" Software License Agreement
TERMS and CONDITIONS:2This is NOT SHAREWARE - It's a commercial product.0You may evaluate this "DEMO" version of D'Bridge3for a period of thirty (30) days. After that time,1you must either purchase a copy or stop using the3software. This "DEMO" program must be activated by.obtaining a "DEMO LICENSE KEY" from a D'Bridge/support system. THIS IS NOT FREE! (Your phone
THIS IS NOT FREE!1company will charge you about $0.30 for a call to1one of our support system. (Overseas users, this0will probably cost more.) In addition, you MUST3provide us with your name, address and phone number)in order to receive a "DEMO LICENSE KEY.">Type "AGREE" if you understand and accept these "DEMO" terms:
AGREE
U
Software License Agreement
TERMS and CONDITIONS:1D'Bridge Software assumes ABSOLUTELY NO LIABILITY0for loss of data or accidental telephone charges3caused by D'Bridge, whether directly or indirectly.(USE THIS SOFTWARE AT YOUR OWN RISK ONLY!5With D'Bridge, we have tried to create a package with4excellent reliability and security, but there may be2"bugs" yet undetected that could (in theory) cause4DATA LOSS or ACCIDENTAL PHONE CHARGES. WE CANNOT BE1RESPONSIBLE FOR THESE PROBLEMS. However, we will0gladly work with you to resolve any real "bugs."3TO USE THIS SOFTWARE, YOU MUST AGREE TO THESE TERMS
UNCONDITIONALLY.;Type "AGREE" if you understand and accept ALL these terms:
AGREE
U
"DEMO" License RegistrationGTo use D'Bridge, the following information MUST be accurately provided:
(Company) name:
Address:
City/State/Zip:
Country:
Attention:
VOICE phone #:
DATA phone #:
Copies needed:
Comments:CIs this ACCURATE? (All information COMPLETELY CONFIDENTIAL)
INSTALLATION: Support Systems;The following support systems are available as of 12/01/89:
-->?Which one would you like to use as your primary support system?6What phone number would you need to dial to reach it? =Press F1 for the previous screen or ESC to abort installation
2Sorry, but if you can't agree with these TERMS and.CONDITIONS, then YOU MAY NOT USE OUR SOFTWARE!0If you have a problem with this, Please contact:
D'Bridge Software Suite 208
15321 South Dixie Highway
Miami, Florida 33176
305-232-5245 voice
305-232-9365 data
305-255-6460 FAX
I=` u
INSTALLATION: Screen colorsAD'Bridge has detected that you are using a color display adaptor!CThere are well over a BILLION possible color combinations which mayBbe used for the screen. Since it would be impossible to list them@all here, we'll start with four basic choices. Using the WINDOW?COLORS menu, you may configure D'Bridge for any combination you%desire. Here's your initial choices:0Standard Colored backgrounds, colorful text
S0Wild Colored backgrounds, CRAZY colors!
W,Conservative Blank backgrounds, mild colors
C5Mono Completely monochrome (Black and white)
Your choice? (S/W/C/M)
MODEMS.SEL
Unable to open MODEMS.SEL
INSTALLATION: Modem selection?D'Bridge requires a HAYES-COMPATIBLE modem to operate properly.>It is important that you have all switch settings and controls@set properly; see your modem manual for more information. There:are really only two special requirements that must be met:<1) Your modem must be able to use the CARRIER DETECT signal.;2) It must hang-up the phone (and not answer) when the DATA( TERMINAL READY (DTR) signal is "low.""What COM port does your modem use?
Use TOUCH-TONE dialing?
Modem type:
[Press F10 to change]
INSTALLATION: Fidonet AddressHD'Bridge is a Fidonet-based EMAIL system. Simlar to a telephone number,BFidonet uses a 4-part "address" to define each system. An addressCconsists of four numbers: ZONE, NET, NODE and POINT. They are used
as follows:
ZONE>Usually defines a continent (1=America, 2=Europe, 3=Australia)
NET.Usually represents a local calling area (city)
NODE*Specifies an individual system witin a NET
POINT.For most systems, use zero (see documentation)BDo not pick a number at random; contact your network administratorEfor the correct assignment. If you are setting up a private network,;please read the user documentation for further information.;ZONE: NET: NODE: POINT:=Press F1 for the previous screen or ESC to abort installationU
INSTALLATION: Country/Area codeED'Bridge already knows how to dial long-distance calls in most cases.AWhat it doesn't know is which phone numbers are within your localCcalling area. To do this, you must specify what "prefix" to remove1from phone numbers in order to place local calls.DIn most countries, you can simply specify your COUNTRY CODE and AREABCODE. For example, in Miami, Florida I use "1" as my country codeC(meaning US/Canada) and "305" as my area code. This means that forFany phone number beginning with 1-305, I will usually place as a localFcall. Of course, there are always exceptions to this; most area codesGcover more than one local calling area an (in the US) I'll need to dialFa "1" before the number, but you'l need to read the user documentation%for a complete explanation of that...
What is your COUNTRY CODE?
AREA CODE?=Press F1 for the previous screen or ESC to abort installation
INSTALLATION: Final recap=To summarize, here's the information that you have specified:
Color choice:
Standard
Conservative
Wild
Monochrome
COMM port:
Modem baud rate:
Dialing:
Touch-tone
Pulse
Modem type:
Fidonet address:
Local "prefix":5Is this information completely accurate? (Yes/No)
N=Press F1 for the previous screen or ESC to abort installationU
DBRIDGE.REGU
DBINS.CTL
0 _
: H M h v {
!1!E!X!k!
#<#J#^#l#
%:%t%
&2&S&\&j&o&z&
'-'<'G'L'k'z'
/(/9/J/[/n/
0,0?0R0e0x0
1/1A1S1i1w1
5*5=5P5c5v5
6)6>6V6d6
7N7a7
8+8J8g8u8
8A9r9
:-:X=f=k=
>%>8>K>^>q>
?/?V?r?
@1@AAUEcEhE
F"F5FHF[FnF
G*G^G
H3HUH
H=IQI[IiI{I'K5K:KYKiK
L.L>LRLWLeLxL
M.MGM`MyM
N!N8NKNbNuN
O=OBOTOeO
P+PfPgQxQ
EXCEPT
OURNET
OTHERS
MYHUB
HOSTS
MYNODESU
FILE-REQUEST
Invalid MINIMUM drive OPERATION
UNPACK
FORWARD
Invalid MINIMUM optionU
ACTIVITY
QUEUE
SCHEDULE
COMMAND
Invalid COLOR optionU
NOT INSTALLED
LOCKED
INITIALIZE
OFFLINE
ANSWER
19200
DELAY
TIMEOUTU
UN-EVENT&Tag may only be from 1 to 8 characters
Duplicate tag detected
NCI,Sleep events no longer supported - see DOCs!
Invalid starting time
Invalid ending time
Unknown parameter -
Invalid event typeU
2400U
HOSTS
OGATE
MYHUB
EXCEPT
OURNET
OTHERSU
"Route to" not applicable here
Invalid syntaxU
"Send to" not applicable here
Invalid syntaxU
Invalid syntaxU
Invalid syntaxU
"Hold for" not applicable here
Invalid syntaxU
"Poll" not applicable here
Invalid syntaxU
!"Pickup from" not applicable here
Invalid syntaxU
!"Event alias" not applicable hereU
'"Allow pickup from" not applicable here
Invalid syntaxU
AREA-U
!"Forward for" not applicable here
Invalid syntaxU
Invalid syntaxU
Invalid syntaxU
"FAX to" not applicable here
Invalid syntaxU
!"FAX forward" not applicable here
Invalid syntaxU
"Forward to" not applicable here
Invalid syntaxU
Invalid baud rateU
b=` u
9999U
#"Between calls" not applicable hereU
DEBUG
TERSE
VERBOSE
Invalid log optionU
""DOS Commands" not applicable here
INTERNAL
COMMANDS
Invalid editor typeU
COUNTRY
NO-COST
DOMESTIC
INTERNATIONAL
SUPPORT
Unknown prefix typeU
QUEUE
No parameter specified
NETWORK
STORAGE
ECHOMAIL
NODELIST
INBOUND
FILES
SCRIPT
Unknown keywordU
ABOUT
FILES
NOFILES
PASSWORD
Unknown keywordU
LIMIT
24-HOURS
MINUTES
FILES
Unknown keyword
Unknow keywordU
PRIVATE KILL/SENT
CRASH
INSERT IMMEDIATE
ARCHIVE/SENTU
RTS-CTS
RESTART CRASHMAIL
SYSTEM
CRITICAL
"Critical" not applicable here
ERROR
LEVEL!"Error Level" not applicable here
TRIES
ALLOWED#"Tries allowed" not applicable here
CONNECTS&"Connects allowed" not applicable here
SESSIONS&"Sessions allowed" not applicable here
FAILURES&"Failures allowed" not applicable here
ECHOMAIL#"Scan ECHOmail" not applicable here
PRIORITIES "Priorities" not applicable here
DYNAMIC
"Dynamic" not applicable here
ADVANCED
ROUTING
DISABLED
PREFIX
IGNORE
EMAIL
Not applicable here
PROCESS
REQUESTS&"Process requests" not applicable here
DEFAULT
SESSION
PASSWORD
AREAFIX
REJECT
UNAUTHORIZED
ARCMAIL
XMAIL
RENAME
INCOMING IMMEDIATE
TURNAROUND
FILES
OFFSETU
NETWORK
ARCHIVE
NETMAIL
PURGE
AFTER
OUTBOUND
DIAGNOSTICS
ALIAS
MEMORY
ALLOWED
SIZES
LISTED
NODES
REJECT
UNLISTED
REQUESTS
FILENAME
No parameter specified
BYPASS ZONEGATES
CREATE
NODELIST.BBS
CONNECTION
RECAP
REQUEST
Extraneous parameter detected
ACCEPT
HUMAN
CALLERS*"Accept human callers" not applicable here
CM-ONLY
NON-CM-ONLY
FORWARD
FILES
Not applicable here
ROUTE
TIMEOUT
IFNA NODELISTS
PRIMARY
SUPPORT
SYSTEM
ADDITIONAL
NODELIST
USING
Invalid COM port
HISTORY
OVERRIDE
UNPACK
DISPLAY
HOURS
"TO" expected
BANNERU
OPERATOR
FUNCTION
REQUEST
Parameter missing
EXTERNAL
GATEWAY
DISPLAY
QUEUE
SCHEDULE POINTLIST
SPECIFIC
Extraneous parameter detected
AFTER
HOURS
FILENAME
No parameter specified
PLEASE
LOADING
COMMANDS
CONNECT
ABORT
Invalid macro key
Invalid function key
Invalid editor ALT-KEY
Invalid editor translationU
"Echo to" not applicable here
ALIAS "Echo alias" not applicable here
Invalid area number
Unknown keywordU
Invalid area number
Unknown keywordU
No area specified
AFTERU
DBRIDGE.AA1
DBRIDGE.AA2U
ATDT \BADECHO\U
ANSWER
OFFLINE
PULSE
AUTO-PRINT
RECEIVE INSTALLED
RINGS
RESOLUTION
NORMAL
COMPRESSED
ROOT DIRECTORY
Invalid FAX optionU
QUEUE\
NODELIST NODEDIFF MYBOSSU
OUTBOUND
INBOUND
ECHOMAIL
AREAFIXU
STARTING
MAXIMUM
RECOVERY
BLOCKU
MULTIUSER/NETWORK
ECHOMAIL
AUTO-ALIAS
NO EXPLODING
WINDOWS
ALARM
TRANSFER
SPEED
HISTORY
DOWNLOAD DIRECTORY
43/50
BLANKOUT
LIMIT
NOCOST
ZMODEM
FILENAME
No parameter specified
AREAS
SCAN AUTO-INIT
MODEM
MAILER
EDITOR LHARCMAIL
ZIPMAIL
PAKMAIL
MINIMUM
POINT
COLORS
LINES
DISABLE
AREAFIX
SEENBYS
LOCAL
FIDONET
PROTOCOL
WAZOO
FORCED
PRIORITY
PRESERVE
SECURITY
LEVEL
STRIP
ORIGIN
PRIVATE
PURGE
ARCHIVE
GROUP
FILE-REQUEST
QUICK
CHECK
LIMITS
DISK-BASED
NETWORK
STORAGE
CONFIG
PASSWORD
PACKET
PHONE
NUMBER
OVERRIDE
FAX-FORWARD
FAX_FORWARD
FAX-FOWARD
INBOUND
GATEWAY
UNLISTED
REQUEST
OUTBOUND
IGNORE
NODELIST
TRANSLATION
EXCLUDE
SOUND
COMMAND
EXTRACT
LHARC
VIDEO
MEMORY
LOG CRASHMAIL
SPECIFIC
COMMANDS
MAXIMUM
MACRO
EVENT
ALIAS
Scheduling conflict
BETWEEN
CALLS
PACKETS
IN-TRANSIT
HOURS
SPECIAL
ALARMS
DEFAULT
PICKUP
MESSAGE
ROUTE ALTERNATE
ALLOW
ROUTING
FORWARD
POINTNET
FORCE
EXTERNAL
OFFSET
Unknown keyword4Out of memory - increase MEMORY SIZES in IMPORT file
DBRIDGE.CONU
? V ` r
!^!u!
"@"s"
#V#i#
%)%o%
&O&{&
'^'w'
(1(F(k({(
)")7)<)S)[)r)z)
)(*?*I*[*u*
+6+@+R+l+~+
,+,E,W,j,
,5-L-V-h-
.(/q/
0(0:0M0
161t1
3$4Y4x4
6:6W6x6
7/797K7e7w7
838=8O8i8{8
9/9L9h9
:":,:>:X:j:
;0;X;
<]<t<~<
<#=:=D=V=p=
>,>E>[>t>
>$?;?E?W?q?
@7@I@q@
AMAeAvA
B&B1BLB[BwB|B
C)CGCQCaCfCuC
C<DSD]DoD
E.E8EJEzE
F%FUF{F
G0GVG
G"HHH^HvH
I2IVI|I
I"J8JMJqJ
K%KbKuK
LPLpLzL
M'MrM
N/N Q@Q]QrQ
R&R0R>RTRbRxR
SDSYS
S4TITsT
U#UMUtU
ULVvV
W%WOWvW
XBXWXlX
Y*YEYOY]YzY
Z*Z?Z\ZqZ
[4[I[^[z[
[:^Z^o^
_._C_\_r_
`E`Z`
a a=aRaga
b3bHb`bub
c;cIcNckc
d4dLdyd
e3e`e
f0fEfZf{f
g$g:gOgdg|g
h,hAhdhyh
i'i@iWili
k(k?kIkWkmk{k
l*lIlfl~l
m+m@m]mrm
n,nDnkn
o(oLoeo{o
p8pJpup
q2qDqoq
r&rQrir
s3sKs
t-tEt
t)uaufu
u$v<vFvUvxv
v$w`wew
x=xbxzx
x,yLyVyky
y]ztz
{T{p{
{+|U|Z|q|y|
}#}P}
~*~4~A~S~m~
$$MIDNITE
DBRIDGE.AUT
zzzzU
Call aborted, inbound collision*ACTIVE CALL: Next call, ESC-Terminate call
Scripts NOT allowed for FAX
Calling
baud
DIALTONE
Call aborted by operator
-Operator abort
Modem timeout
-Modem Timeout
CONNECT
Modem reports "
-Attempting sync
-Dialing
DBRIDGE.DL1IDate Time Calling system Sent Received E/T
Modem is answering the phone
ANSWERING:
Do not disturb!
- Answering -
- Making decisions -
DEBUG: Packet not found
No carrier detected
DBQUEUE
Modem reports "
""ACTIVE SESSION: ESC-Terminate call
ESC!Session failure, no mail unpackedU
ECHOMAIL.CTLU
" ( - < N m
TEMP.FIL
DBRIDGE.MARU
Calling FAX:
Forwarding FAX:
Unable to find JTF 9600 card
Calling
QUECARD.FAX
LOGFILE.FAX
Call status:
Sending
Complete
Error
End of page
End of XMIT
D-Code
No dial tone
Operator abort
No answer/No FAX
Remote ID: Success,
FAX sent OK
code
FAX reports:
No response from FAX software
-TimeoutU
EMSI_R
-- EMSI/C1 --
-- EMSI/C2 --
-- EMSI/C3 --
EMSI: Failure 4
EMSI: Failure 5
EMSI: Failure 6
Connected to U
TEMP.$$$U
DBRIDGE.DL2ODate Time Sent to Sent Received E/T Cost
"ACTIVE SESSION: ESC-Terminate call
ESC Connected
-Active session
DBRIDGE.MAR
-- Waiting for turnaround --
"BARK" requests not supported
Pickup failure,
-Pickup failure
Session successful,
DB*.KEY
copy
DB*.KEY >nul.lst
License key(s) received!
Session failure,
-Session failure
Operator abort,
-Operator abort
Lost carrier,
-Lost carrierU
DB0*.KEY
DB9*.KEY
No key
000000U
DBRIDGE.$$$
Unable to create DBRIDGE.$$$
DBRIDGE.FRSU
- -
FILES.BBS
**Internal error
*.REQ
D'Bridge 1.30
Unlisted systemSYour system is not in our nodelist. Please contact the system operator for request
privileges.
Over request limitAYour system has already exceeded your 24-hour file-request limit
with
. Please try again tomorrow
Your connection speed8Your modem is too slow; This system requires at least a
baud modem
to process file-requests.
File-request report1The following is the result of a file-request to
-Filename Bytes Date Description
--------- ----- ---- -----------
Update(s) requested:
File(s) requested:
**File not found
**Invalid request password
**No newer file to update
**Over request limit
/ Files Bytes Time
/ ----- ----- ----
This session
24-hour periodU
Function request:
Executing function request "
CALLER.INF
DBRIDGE.MAR
ecured mail for
D'Bridge 1.30
Bad session password
The link between
(your system) and
(my system)
requires a session password;
you have specified "
" as the password and
that is not correct."you have not specified a password.D Please contact the operator of this system for more information.
: I T d }
% 0 5 E W w |
b"v"{"
"2#A#z#
$"$'$6$R$v${$
&+&3&N&d&u&
&$'O'_'z'
(#(3(K([(`(j(o(
)*)N)Z)f)r)
*!*-*H*X*h*q*v*
DBRIDGE.MAR
Secured mail for
Invalid password "
Unsecured mail for
-- Processing --U
TSYNC:
Unable to requeue filesU
TEMP.FILU
TEMP.FIL
Unable to create temporary fileU
Bink Binkley refuses XMAIL... Aborted
TEMP.FIL
DBRIDGE.MAR
. H ] m
Incoming call
*.REQ
D'Bridge 1.30
<> "Copyright 1988/1989 by Chris Irwin
Processing network mail only... HANG UP NOW!
You have reached a private system... HANG UP NOW!
Please wait...
EMSI_I
-- EMSI/A1 --
-- EMSI/A2 --
-- EMSI/A3 --
EMSI: Failure 1
EMSI: Failure 2
EMSI: Failure 3
Exiting with errorlevel
Connected to (
Sorry, processing EMAIL only. Bye!
BBS caller rejected (disk space)E
Sorry, there is not enough disk space available to load the BBS.
%
Sorry, but your modem is too slow.
Anxious
Human
caller; passing to BBS
DBRIDGE.RSE
SET commands not yet supported
Returning from BBS softwareU
. 9 > P l q
, F P Z v
(!8!A!M!V!e!p!u!
AUTO-ALIAS: U
:;F t
;F u<
EMSI_U
8N1,PUA
ZAP,ZMO
D'Bridge
1.30P
IDENT
-Unlisted-
EMSI_DAT
EMSI_DAT
IDENT
Remote: Hold all trafficU
EMSI:
No key
SysopU
YOOHOO:
Dutchie FrontDoor
AirMail
BinkleyTerm
D'Bridge LINK
D'Bridge
No key
WaZOO mailer #
/#WARNING: There are incompatabilites'with point systems using other mailers.
SysopU
-- YOOHOO --
Unlisted system; access denied.
**ILLEGAL ACCESS
-- YOOHOO/2U2 --
YOOHOO Failure!
-- YOOHOO --
-- YOOHOO/2U2 --
YOOHOO FailureU
! 2 < b g l {
6 O T y
!%!6!`!m!
"!"I"Q"t"
#+#P#
$'$H$M$R$l$|$
%(%9%j%y%
&)&3&B&
($(-(:(G(L(Q(k({(
)')8)h)|)
,#,0,=,B,G,a,w,|,
-E-s-
.5.=.`.q.
/M/k/
0'080`0h0
161G1x1
292J2r2z2
3;3@3E3b3s3
4)424A4L4e4y4
DBRIDGE.CONU
FLAGS
.MSGU
q<Fum
HOSTS
EXCEPT
OURNET
OTHERS
MYNODES
MYHUB
MYBOSS
OGATE
(Continued)
D'Bridge 1.30/
FAX Message #
* CONFIDENTIAL *
Date:
From:
To:
Subj: U
l^ vg
l^ t
l^ u
Unable to write FAX packetU
Unable to create:
DBRIDGE.NMS
DBRIDGE.$$$
*.MSG
Quickbase:
MSGHDR.BBS
DBRIDGE.PTR
D<Ru@
-- Scanning Queue --
System:
Xmit:
Freq:
Poll:
Areafix:
XMAIL:
DBRIDGE.CON
Unable to poll
; unlistedU
I T DBRIDGE.REG DBRIDGE.REG
&NOTE: To obtain a "demo" key that will% make the software function, you% must install the X00 driver and
have a modem configured.U
DBRIDGE.CON
Entry killed
EntryU
DBRIDGE.RSN
DBRIDGE.CON
Using the
existing queue entr
DBRIDGE.RSE
DBQUEUE
Building outbound queue
QUEUEscan: Press ESC to cancel
-- Building Queue --
-- Clearing Queue --
-- Scanning NETmail --
Message:
Scanned:
Packed:
System:
is unlisted, HUB unknown
No NETmail area specified
message
scanned, outbound
DBRIDGE.XMA
- Translating phone numbers -
Scan aborted by operator
queue entr
createdU
% * 9 R \ o y
# - 5 U b g
!6!;!@!J!g!t!|!
" "#"="B"J"O"q"v"
# #/#L#b$j$o$
$ %)%3%B%i%s%
& &/&H&S&b&t&
'('-'5'E'
( (2(;(V({(
)$)3)G)X)])g)y)
*:*G*U*Z*n*
+++5+`+e+t+
,(,-,U,d,
-+-j-
-H.W.
.W/\/
/A0F011O1T1c1
2H2f2k2z2
3M3Z3
3G4L4Q4V4u4
5*5<5G5V5m5z5
6c6h6m6u6z6
677@7N7
7 8B8\8n8
;4; <
</<4<I<T<d<s<
=)=E=Z=h=
>$>0>c>p>~>
?(?>?I?S?\?k?v?
@#@.@3@E@a@f@
@$A6A
BIB]BnB
C@CZCeC|C
C!D+D0D;DCDMDaDyD
E!E:EEEJEUE`E|E
FCFWF
H-H=HGHUH
J0J?JDJSJXJgJlJ{J
K)K8K=KOKgKuK
L&L4LPL[L{L
N5N@N^NgNwN
O+OBOOOzO
P&P+P6PEPaP
T%T4T9THT]TqTvT
U$U.U=USUeU
V,V1VAVJVeVnV|V
WZWrW
XTXYXcXlXxX
Y'YBY]YxY
Y Z(Z@ZrZ|Z
[@[I[e[o[
\!\<\O\
Msg #
Date:
(Sent
From:
To:
Encl:
FReq:
Subj: U
'Unable to open outbound message archive
l^ vg
l^ t
l^ u
:00 * DELETED
.MSGU
DBRIDGE.MAR
Marking/Deleting mailU
% 9 S e
Executing event "
Executing event "
Invalid errorlevel specified:
SINGLE-KEY COMMANDS
ALT-A
Select alias address
ALT-C1Dial a system from the nodelist (Terminal mode)
ALT-D1Dial a system from the directory (Terminal mode)
ALT-E
Read/Enter EMAIL messages
ALT-F
Request file(s)
ALT-H
Display EMAIL history
ALT-I
Display system information
ALT-N'New ECHOmail link / Resend old messages
ALT-P3Poll a node (Call to see if there is mail waiting)
ALT-Q
Rebuild outbound queue
ALT-R1Request ECHOmail link (Outbound AREAFIX request)
ALT-S
Toggle schedule window display
ALT-T
Transmit file(s)
ALT-V
View/modify queue entries
ALT-X
EXIT D'Bridge
ALT-Y
PUSH to DOS
ALT-Z
DROP to DOS
ALT-4
Toggle 43-line EGA mode
ALT-5
Toggle 50-line VGA modeU
$$MIDNITE
Executing function: ALT-F
Executing function: F
Invalid errorlevel specified:
Executing event "
Active U
Y p { U
Zone
Net
Node
Point
Alias
Auto-alias
GMT offset
Video
No snow
Memory
Mailer EMS
Editor EMS
No exploding windows
Minimum operation
Minimum BBS
Minimum unpack
Minimum forward
Memory sizes
Terse log
Verbose log
Diagnostics
Transfer speed
Display schedule
Main colors
Log colors
Activity colors
Queue colors
Schedule colors
Command colors
43/50 line mode
No blankout graphics
Multiuser/Network
Network mail storage
QuickBBS
Network mail area
Network mail path
Bad Echomail path
New Echomail path
Link ECHOmail replies
Add ECHOmail areas
DBRIDGE.AA1
DBRIDGE.AA2
Local area
Echo area
Strip SEEN-BYs
Origin
Echo alias
Echo to
Group
Security level
Area archive
Purge after
days
Purge all except messages Preserve
Private
User
System name
Operator name
Inbound files path
SJF directory path
Quick directory path
Download directory
Packet path
Disk-based queue
Script file path
Outbound history file
Inbound history file
ECHOmail history file
AREAFIX history file
Outbound mail archive
Network mail archive
Netmail purge after
Netmail purge all except
ABOUT file U
FILES file
Config password
Default session password
Session password Keep dups
Disable AREAFIX
AREAFIX information
Limit nocost calls
Reject unauthorized mail
Rename unauthorized files
Modem not installed
Modem initialize
Modem offline
No DTR drop
Auto-init modem
Modem answer
Modem dial 300
Modem dial 1200
Modem dial 2400
Modem dial 4800
Modem dial 9600
Modem dial 19200
Specific dial
Modem delay
Modem timeout
Maximum baud rate
Modem locked
RTS-CTS
Port COM
Display timeout
Editor scan ECHOmail
No sound effects
Default insert
Force INTL addressing
Macro
Command
Command ALT-
Minimum file-request baud Using BBS
BBS scan ECHOmail
BBS call timeout
Minimum BBS baud
BBS hours from
Banner filename
Too slow filename
After hours filename
Please wait text
Loading BBS text
BBS DOS commands
Editor DROP
Editor EXIT
Editor PUSH
Default private
Default kill/sent
Default crash
Default immediate
Default hold
Default archive/sent
Restart crashmail Kill null
Kill In-transit
No in-transit rescan
Process Xmail
Process Echomail
Rename incoming files
Save AREA lines
Save SEENBYs
Alarm
Call alarm
Alarm hours from
Special alarms U
7M<Du
#* D'Bridge "Exported Configuration"
* Created by v1.30 on
FAX pulse dialing
FAX auto-print
FAX receive allowed
FAX installed
FAX answer offline FAX type
FAX rings
FAX resolution normal
FAX resolution high
FAX font compressed
FAX font normal
FAX root directory
FAX ID
Pointlist
Fake pointnet
Additional user file
Outbound gateway
Bypass ZONEgates Nodelist
Private nodelist
No user list
Exclude NET
NET translation
Country prefix
No-cost prefix
Domestic prefix
International prefix
Primary support system
Primary support phone
Phone number override
Baud rate override
History days
LHARC extract command
LHARC creation command
ZIP extract command
ZIP creation command
PAK extract command
PAK creation command
ARC extract command
ARC creation command
Override unpack
Request path
Specific request
Listed nodes only
Reject unlisted requests
File-request limits 24-hours
Check limits before
Check limits after
File-request limit
minutes
files
Function request
External gateway
Forced priority
Fake pointnet for
Fidonet protocol for
WaZOO protocol for
LHARCmail for
ZIPmail for
PAKmail for
Ring commands
Connect commands
Abort commands
Editor translation ALT-
ZMODEM starting block size
ZMODEM maximum block size
ZMODEM recovery block size
ZMODEM block step rate
Event
Disabled
Critical
Error level
DOS commands
Between calls
Tries allowed
Sessions allowed
Failures allowed
Maximum message cost
Host route private
Hold private
CM-only
Non-CM-only
Ignore EMAIL calls
Ignore FAX calls
Dynamic
Scan ECHOmail
Priorities
Process requests
Accept human callers
Event alias
Packets for
Hold for
Poll
Pickup from
Allow pickup from
Route to
Route files to
Forward for
Forward to
Forward files for
Forward files to
FAX to
Intl FAX-forward for
Local FAX-forward for
DOS commands
Unable to export
EXPORT
Exporting configuration
Auto-exporting configuration
OUTPUT CONFIGURATIONJThe "OUTPUT CONFIGURATION" option allows you to export all of the D'BridgeHparameters in a standard text file for inspection or transfer to another
D'Bridge system.
Export configuration to :
\DBRIDGE.CFG
Y(File exists - Do you wish to replace it?
ERROR:
Unable to create export file.
Writing configuration...U
8 K P Z b y ~
"@"]"b"l"
#2#B#G#V#j#w#
$&$B$^$
%2%7%P%U%n%s%
& &"&'&@&E&^&c&|&
'%'*'9'W'o'
0#0(0:0H0U0c0h0r0
1'1,1>1P1U1g1v1{1
2,212A2[2h2m2
31363F3c3
4"4/444F4S4X4j4y4~4
5!5&585E5J5\5i5n5
6"6;6@6P6m6
7$737@7E7^7m7z7
8 8=8Z8w8
9P9c9h9p9
:":O:T:e:w:|:
<H<M<
=#=(=A=F=Z=w=|=
>.>B>O>d>i>{>
? ?%?B?G?[?`?}?
@'@,@>@P@U@r@w@
A8AYAzA
B@BaB
E!E2E9EQEfEoE
F(F:FKFUFcFwF
G*GGGXGgGvG
HCHQHU
KEnter the "tag" for the message area - a word to help you remember the name/Enter the security level for this message area.KEnter the group number for this area. (Areas may later be sorted by group)(Enter a description for the message areaHSpecify the storage method: Fido or QuickBBS format; None for passthru.@If you are running a BBS, specify its corresponding area number.&Enter the QuickBBS area number (1-200)@Enter the path of the DOS directory that contains the .MSG filesMDo you normally enter PRIVATE messages in this area? "Yes" to default PRIVATEDWhat file (if any) would you like to use to archive purged messages?ESpecify the purge criteria for this area. Press F1 to change method.NIf you want to preserve the first few messages in this area, specify how many./Specify the area type, either ECHOMAIL or LOCALEEnter the ECHO NAME. Make sure you specifiy this is exactly correct.GEnter the Origin line exactly as you wish it to appear in all messages.EIf you wish to use an "alias" address for this area, specify it here.GIf you wish to strip-off all SEEN-BY lines, say "Yes" - NOT RECOMMENDED>Specify the default priority: IMMEDIATE, CRASH, NORMAL or HOLDJSpecify a list of systems to send this conference: <ADDRESS>[,<PRIORITY>]U
PREVIOUS
CHANGE DUPLICATE
REMOVEIUse the ARROW keys to select the option; press ENTER to select. ESC-Exit
ARROW
ENTER
Areas:U
SELECT MESSAGE AREA:AHighlight desired area or press ENTER or type area TAG or NUMBER.
ENTER
NUMBER
Change
AbortU
No Crash Immediate Hold Normal
MYBOSSU
None QuickBBS Fido
QuickBBS area #:
Directory path:
Purge after: days
Purge except: messages
Passthru
Echomail
Local
N/A
TE$T.$$$
Create directory?
PUse the ARROW keys to select the desired option, then press ENTER. ESC-Finished
ARROW
ENTER
LOCAL/ECHOMAIL AREA MANAGER
DBRIDGE.AA1
DBRIDGE.AA2
Area #
Highest area #
Security level:
Sort group:
Description:(Storage: (Fido/QuickBBS/None)
Directory path:
Default private?
Area archive:4 Purge after: days Preserve: messages&Area type: (Echomail/Local)
Area already defined*Not sequentially assigned... Are you sure?
ESC -Commands
Checking for dups...
ERROR: Duplicate tag
Immediate Crash Hold Normal
Purge after: days
Purge except: messagesU
-Cancel
Remove this area?
U
0 5 D L a f u }
- ?
A!V!d!x!
" ":"S"h"
#+#E#a#v#
$C$X$f$
%D%\%e%u%
&$&4&L&U&e&
'6'I'i'w'
(+(4(9(T(](k(
+!+B+G+Y+h+v+{+
,",5,H,[,n,
-,-?-R-e-x-
/:/P/U/c/w/
0/0N0o0}0
1'151
2#2M2f2
353C3
4?4T4d4
565?5O5d5x5
6!626m6|6
677F7
8=9L9m9}9
:':G:R:\:k:}:
;!;0;|;
;$<7<
=,=P=k=
>(>p>
?)?=?:@U@l@
A%A*A;AWAaA~A
B+BqB
C'CNCcCqC
C?DPDZD
E"E,EbEwE
E F'F1F?FSFaF
F G"G[GeGuG
G"H`HeHnH|H
I*I_IiItI
JkJtJ
JAKhK{K
N$N2NENoN
O1O:OJOkOzO
O P"P7PEPXP
R!R+R9R>RORTR\RfRpR
TRANSMIT FILES - NO ROUTING
FILE-REQUEST
UPDATE-REQUEST
Send to:
Request from:
Poll whom:
MYBOSS2 Priority: (Normal/Crash/Immediate)
I Immediate
Crash
Normal
Filename(s):
-Cancel request
-List nodes in NET
-Change ZONE:NET
-List all NETS
-List NETS in ZONE
-Scan user names5Enter the NAME or ADDRESS of the desired destination.
** Unlisted **
* Can't call yourself *
Crash Normal
Cancel poll request?
LEnter a list of files to send: <FILENAME> <HOLD, NORMAL, CRASH or IMMEDIATE>
Filename(s):1Choose the priority: <NORMAL, CRASH or IMMEDIATE>
LEnter files to request: <FILENAME>[,<PASSWORD>] <NORMAL, CRASH or IMMEDIATE>
0 NormalU
REQUEST ECHOMAIL LINK
Request from:
MYBOSS
Conference(s):
Area listing?
Get old messages?7 Priority: (Hold/Normal/Crash/Immediate)
No Immediate
Crash
Normal
-Cancel request
-List nodes in NET
-Change ZONE:NET
-List all NETS
-List NETS in ZONE
-Scan user names7Enter the NAME or ADDRESS of the desired ECHOmail link.
* Only YOUR points allowed *
** Unlisted **
* Can't call yourself *
Requires new AREAFIX password.
New password:
Cancel link request?
BEnter a list of conferences to JOIN or QUIT: <+ or -> <AREA NAME>
Conference(s) :NWould you like to receive a listing of conferences available from this system?
No EWould you like to receive all the old messages for these conferences?NWhat EMAIL "priority" would you like to use? HOLD, NORMAL, CRASH or IMMEDIATE
Crash Hold Normal
'NEW ECHOMAIL LINK / RESEND OLD MESSAGES
Send to:
Conference(s):
Re-scan messages?
Send area list?7 Priority: (Hold/Normal/Crash/Immediate)
Process now?
No Immediate
Crash
Normal
-Cancel request
Wait...
DBRIDGE.AA1
DBRIDGE.AA2
MYBOSS
-List nodes in NET
-Change ZONE:NET
-List all NETS
-List NETS in ZONE
-Scan user names7Enter the NAME or ADDRESS of the desired ECHOmail link.
* Only YOUR points allowed *
** Unlisted **
* Can't call yourself *
Crash Hold Normal
No JEnter a list of conferences to SEND or STOP SENDING: <+ or -> <AREA NAME>
Conference(s) :BWould you like to send all the old messages for these conferences?
Y=Would you like to send a current area listing to this system?NWhat EMAIL "priority" would you like to use? HOLD, NORMAL, CRASH or IMMEDIATE
4Would you like the request(s) processed immediately?
D I X t
' : V d w
!>!N!
#*#F#]#j#t#
$)$3$Y$n$
%(%A%Z%o%
%&&k&
+V+n+
,#,6,I,\,o,
-,-;-I-N-`-n-s-
.+.>.Q.d.~.
/'/</J/_/m/
0.0i0
0&1T1
262D2n2
3,3@3N3
4 4|4
565K5
6#636O6f6s6}6
7%727<7b7w7
818J8c8x8
8&9;9
9-:Q:[:U
Limits reset for U
Q- Immediate
Crash
Normal
TEMP.FIL
No Immediate
Crash
Hold
NormalU
Areafix
D'Bridge 1.30
INTL
TOPT
FMPT ---
TEMP.FIL
> C o z
---
DBRIDGE.DL1
INBOUND MAIL HISTORYNDate Time Calling system Received Sent E/T
UP/DOWN/PGUP/PGDN/ESC-Exit
** Undefined Echomail Area **
** Unlisted **
DBRIDGE.AA1
DBRIDGE.AA2
DBRIDGE.DL3
RECEIVED ECHOMAIL HISTORYNDate Time Origin Area Description Rcvd Dups
UP/DOWN/PGUP/PGDN/ESC-Exit
---
DBRIDGE.DL2
OUTBOUND MAIL HISTORYNDate Time Sent to Sent Received E/T Cost
UP/DOWN/PGUP/PGDN/ESC-Exit
Added
Added/Scanned
Removed
Violates security
Area listing
DBRIDGE.DL4
AREAFIX HISTORY;Date Time System Area Action
UP/DOWN/PGUP/PGDN/ESC-Exit
0123456789
U
Purging history over
days
Purging history
DBRIDGE.NMS
?D*.*
?D*.* >NUL
DBRIDGE.DL1
DBRIDGE.TMP
DBRIDGE.DL2
DBRIDGE.DL3
DBRIDGE.DL4
DBRIDGE.SIF
890501U
- 2 A
& / 8 = ^ t
##A#K#T#Y#q#
$/$>$I$^$r$
%-%A%T%d%o%z%
&3&>&I&Y&^&q&
'('3'A'S'c'h'
(#(.(=(B(](n(3)W)~)
*+*]*b*
SMTWTFSJ # Start End S M T W T F S Tag Type StatusJ
ESCFUse the ARROW keys to select the event to delete, then press ENTER. FUse the ARROW keys to select the event to change, then press ENTER. FUse the ARROW keys to select the event to duplicate, then press ENTER.
ARROW
ENTERU
ERROR:0Event table full - no more entries may be added. Press ESC
ABORT entry?
ABORT change?
Delete event?
ADVANCED ROUTING for event #
Accept EMAIL calls?
Accept FAX calls?
Host-route privates?
CM/Non-CM systems only?
Non-CM
Dynamic event?
Process requests?
Accept human calls?
Maximum cost/msg:
Scan ECHOmail areas?
Priorities allowed: (NCI)
Packets for:
Hold for:
Poll:
Pickup mail from:
Allow pickup from:
Route to:
Route files for:
Forward mail for:
Forward mail to:
OURNET
Forward files for:
Forward files to:
FAX to:
Intl FAX-forward for:
Local FAX-forward for:
DOS commands:U
CM
Non-CM
Both
Packets for:
ALL Hold for:
Poll:
Pickup from:
Allow pickup from: Route to:
Route files for:
Forward for:
Forward to:
OURNET
Forward files for:
Forward files to:
FAX to:
Intl FAX-forward for:
Local FAX-forward for:
*DOS commands:U
Event edit mode:
Press ESC for commands
Change
Routing
-Time conflict-
Data incomplete
Abort
@<Au<
PUse the ARROW keys to select the desired option, then press ENTER. ESC-Finished
ARROW
ENTER
UN-EVENT DUPLICATE
CHANGE
REMOVEU
< F c h v
!!!/!B!a!v!
" "."A"Z"t"
###1#N#l#
$"%I%n%
% &<&R&w&
& '3'
'5(i(|(
())P)c)q)
+!+>+U+j+
,!,*,1,:,
.4.I.\.q.v.
/!/+/4/B/K/Q/
/N0c0s0
0k1~1
5;5P5c5
6-6B6U6n6
7/7B7l7
8'8?8R8s8
9)9<9]9w9
:&:G:a:t:
;1;K;^;
<5<H<i<
<Q>|>
?Y?j?y?
@+@^@s@
A'A<AKA
BJB[BjB
COCdCsC
D D/DDDtD
E.E<EgE
F-FYFzF
G0GHGXGhG
H H0H\HtH
H$I<ILI\I
J$JPJhJxJ
K0K@KPK|K
L/L8LFL
R7RJR]RnR~R
S(SCSHS[StS
T+T:ThT}T
T-U`U
V"V;V@VNVrV
W)W=W\WfW
Y#YBYmY
Z:ZeZ
[2[f[
\'\5\K]T]d]
])^E^Z^|^
^ _W_v_
_O`^`w`
a'a8a
b0b5bDbpb
d8d[dwd
d0e=e
ECHOMAIL.CTLU
WAIT... Checking disk space
"DISK SPACE MINIMUMS (in Kilobytes)
Drive(s)
Total space
Free space
Percent free
System operation
BBS operation
Unpack mail
Forward ECHOmailU
ZMODEM PARAMETERS
Baud rates
19200
38400
Starting block size
Maximum block size
Recovery block size
Block step rateU
"Type "EXIT" to return to D'Bridge.
COMSPECU
SUPPORT SYSTEM SELECTION;The following support systems are available as of 12/01/89:
-->@Which one would you like to use as your primary support system? 6What phone number would you need to dial to reach it?
Dbridge.prm+Version 1.30 Single-line / 15 December 1989
DBRIDGE.AA1
DBRIDGE.SCH
9 > ] b m
> W \
!"!F!_!d!
"*"N"g"l"
#1#<#U#Z#s#
%0%5%@%g%l%w%
&G&L&W&k&
&,'?'T'Y'x'}'
)A)Q)a)f)x)
)H*^*h*~*
NODELIST CONFIGURATION
"St. Louis" nodelists?
Private nodelists:
Pointlist:
Fake pointnet:
Fake point addressing:
Create username index:
Additional user file:
Outbound gateway:
Use ZONEgates?
Exclude ZONE:NET(s):
Translate NET(s):
Country prefix:
No-cost prefix:
Domestic prefix:
International prefix:
Phone # override(s):
Baud rate override(s):
"St louis" nodelists:
Private nodelists:
Fake pointnet for:
Exclude ZONE:NET(s):
Translate NET(s):
Phone # override(s):U
$ 2 X
SECURITY/MISCELLANEOUS#Default password for outbound mail:# Session passwords:# Ignore unauthorized mail packets:
No # Rename unauthorized inbound files:"Allow unlisted nodes to send mail?!File-requests for unlisted nodes?,Time limit for file-requests: (minutes), File-request limit: (K bytes)6Maximum files for file-request: (NUMBER of files)"Check limits BEFORE or AFTER file:
Link ECHOmail replies?4Auto-add ECHOmail areas? (No/Fido/QuickBBS)
QuickBBS
Accept AREAFIX requests?
AREAFIX information:
Forced priorities:# Purge netmail after: days
Fido
No U
Wait, searching path...
XMAIL CONTROL
Unpack inbound XMAIL?
LHARCmail for:
ZIPmail for:
PAKmail for:
LHARC creation command:
LHARC extract command:
ZIP creation command:
ZIP extract command:
PAK creation command:
PAK extract command:
ARC creation command:
ARC extract command:
' 1 p
TE$T.$$$
Create directory?
QuickBBS area number:
Network mail path:U
(<QuW
DIRECTORY PATHS/Network mail storage: (Fido/QuickBBS)
QuickBBS
Inbound files path:
Packet path:
Disk-based queue:
Script file path:
Download directory:
Bad ECHOmail path:
New ECHO area path:
SJF directory path:
Quick directory path:
"ABOUT" file name:
"FILES" file name:
Request paths:
Specific requests:
Outbound history file:
Inbound history file:
ECHOmail history file:
AREAFIX history file:
Fido
Create Quick base?
MSGINFO.BBS
MSGIDX.BBS
MSGHDR.BBS
MSGTOIDX.BBS
MSGTXT.BBS
Request paths:
Specific requests:U
(<Qu[
q<TuZ
& 4 G [ i |
PUse the ARROW keys to select the option; press ENTER to change colors. ESC-Exit
ARROW
ENTER
Main borders
Command borders
Highlite color
"Dim" color
"Bright" color
Window color
Highlight color
ACTIVITY
QUEUE
SCHEDULE
Colors:
SETUP EDITOR PARAMETERS
Editor method:
Restart crashmail?
Scan ECHOmail?
Sound effects?
Default private?
Kill/sent?
Archive/sent?
XMail?: Priority? (Immediate/Crash/Normal/Hold)
Insert?
INTL addressing?
Valid user names: Immediate
Crash
Normal
(DROP/PUSH/EXIT)
Crash Hold Normal
Valid user names:
>7MPu
>7MEu
>7MPu
>7MEu
FSelect the desired alias address, then press ENTER. ESC to cancel
ENTER
SELECT ALIAS ADDRESS
waiting... U
! 6 }
!WARNING: Parameter memory too low
@!WARNING: Overlay buffer too small
BASIC CONFIGURATION
Total memory: (in K)
WorkRAM: (in K)
Overlay buffer:
Free WorkRAM:
Exploding windows?
Screen output:
BIOS
No snow
Memory
Log filename:
Log level:
None
Terse
Verbose
Diagnostics?
Transfer speed:
Primary address:
Alias addresses:
Automatic alias?
Offset from GMT:
System name:
Operator's name:
Audio alarm?
Alarm hours:
until
24 hours
Call alarm:
Special alarms:
Config password:
Keep history for: (days)
Video timer: (minutes)
Blankout graphics?
(BIOS/Memory/No snow)
(None/Terse/Verbose)
(bps/cps/kpm)
until
24 hours
*Special alarms:
waiting... U
7 J d y
PSpecify the starting block size for ZMODEM-32/64/128/256/512/1024/2048/4096/8192OSpecify the maximum block size for ZMODEM-32/64/128/256/512/1024/2048/4096/8192PSpecify the recovery block size for ZMODEM-32/64/128/256/512/1024/2048/4096/8192?Specify the block size for error recovery (powers of two only!)MSpecify how many consecutive blocks must be sent before increasing block sizeU
:Select Fido (MSG files) or QuickBBS for your NETMAIL area.9Enter the QuickBBS area number you are using for NETMAIL.FEnter the directory path where your network mail MESSAGES are located.:Enter the directory path where INBOUND FILES should arriveIEnter the directory path to use for outbound packets. (May be a RAMDISK);Enter the directory path to use for the "Disk-based queue."HEnter the directory path where your "script" files are stored. (if any)HEnter the directory path where terminal-mode downloads should be stored.JEnter the directory path where unknown echomail messages should be stored.HEnter the root directory where new ECHOmail directories should be added.EIf you wish to use a SJF message base, specify what directory to use.JIf you wish to use a QuickBBS message base, specify what directory to use.IFile to send if "ABOUT" is requested. (This should describe your system)LFile to send if "FILES" is requested. (This is a list of requestable files)>File-request directories: <directorypath> <optional password>MSpecific filenames for request: <specificname> <filepath> <optional password>DWhat file (if any) would you like to use for outbound EMAIL history?CWhat file (if any) would you like to use for inbound EMAIL history?FWhat file (if any) would you like to use for inbound ECHOmail history?EWhat file (if any) would you like to use for inbound AREAFIX history?U
MWhat file would you like to use for an outbound mail archive? (Archive/Sent)7What file would you like to use to archive old NETmail?GSpecify the NETmail purge/archive criteria. Press F1 to change method.?If duplicate files are received, would you like to rename them?LDo you want the mail packets to be unpacked when they arrive? (Usually YES)@Do you want messages with no text to be killed when they arrive?1Do you want to flag IN-TRANSIT mail as Kill/Sent?MDo you want to rescan the NETmail area after each in-transit message is rcvd?+Do you want to process ECHOmail internally?JDo you wish to limit the number of "sessions per event" for no-cost calls?CDo you wish to leave the AREA lines intact when unpacking Echomail?ADo you wish to leave the SEENBY lines in your Quick message base?GWould you like to save duplicate ECHOmail messages in the BADECHO area?LWould you like Fido-style ECHOmail messages automatically linked by subject?NIf you wish to automatically add unknown ECHOmail areas, specified the format.<Do you wish to accept and process incoming AREAFIX requests?OAREAFIX information: <ADDRESS> <PASSWORD> <SECURITY> <PRIORITY> <ALLOW RESCAN?>=Enter forced EMAIL priorities: <ADDRESS> HOLD/CRASH/IMMEDIATEU
1Would you like to unpack incoming XMail archives?K<address_list> EXCEPT <address_list> (NONE/ALL/OURNET/OTHERS/MYHUB/MYNODES)7Specify the command to create LHARC files. (LHarc a -m)9Specify the command to extract LHARC files. (LHarc x -cm)0Specify the command to create ZIP files. (PKZIP)6Specify the command to extract ZIP files. (PKUNZIP -o)0Specify the command to create PAK files. (PAK A)5Specify the command to extract PAK files. (PAK E /WA)0Specify the command to create ARC files. (ARC A)1Specify the command to extract ARC files. (ARC X)U
!Do you have a FAX card installed?DWhich FAX card are you using? (Only JT FAX supported at this time)3What is your "FAX root directory?" (Often C:\FAX\)5What is your FAX identifier. (21 characters or less)?Default type font? (Normal=80 columns, Compressed=132 columns)9Default resoution? (Normal=200x98 DPI, High=200x196 DPI)&Do you want to use TOUCH-TONE DIALING?)Do you want to receive inbound FAX calls?:How many rings should the FAX modem wait before answering?:Do you want the inbound FAX traffic printed automatically?FDo you want the FAX software to answer calls when D'Bridge is offline?=What is the ASCII value (decimal) to display for the ALT-KEY?EWhat is the ASCII value (decimal) to store/transmit for this ALT-KEY?U
0Specify the amount of RAM that D'Bridge may use.9Specify how much of the total RAM to reserve for WorkRAM.8Should the windows in D'Bridge "explode" when displayed?JSelect the screen output mode desired. (For some multi-taskers, use BIOS)+Enter the full pathname of your "log" file./Choose from None, Terse or Verbose log formats.BDo you want to run diagnostics? (Aids in debugging scripts, etc.)JChoose a transfer-speed method: Bits/second, Characters/second or K/minute7Enter your primary system address: ZONE:NET/NODE.POINT9Enter a list of alias addresses: <ADDRESS> <SYSTEM NAME>NIf you want D'Bridge to auto-select an alias address based on ZONE, answer YESGEnter the number of HOURS behind GMT (Greenwich mean time) See manual.*Enter the name of your mail system or BBS.>Enter the name of the primary system operator. (Probably YOU)@Would you like to be alerted to each incomming call with a tone??Enter the time-range that you wish the audio alarm to function.NTo override the default "call alarm," specify MUSIC CODES. (Press F1 to hear)NAlarms for specific systems: <ADDRESS> <MUSIC CODES> (Press F1 to hear alarm)ASpecifying a configuration password "locks" the "config" screens.ASpecify how many days of inbound/outbound history to keep online.FEnter the number of minutes of inactivity before the display "blanks."ODo you want an "inactivity" indicator to be displayed when the screen is blank?U
IDo you wish to pass "human" callers on to another communications program?NHow many seconds to wait until passing a "human" call to the BBS? (10 minimum)JIf your "BBS" has specific hours, enter the starting and ending time here.HIf you require a minimum baud rate for "human" callers, specify it here.LIf you wish to display a text file when a user calls in, enter the pathname.HIf you a caller is below your minimum baud rate, this file is displayed.EIf your "BBS" has hours, this file will display before/after "hours."DEnter the "Please wait..." text that you wish to display to callers.BEnter the text to display when D'Bridge decides a caller is human.OEnter the DOS commands to invoke your "BBS." Read the documentation for codes.7Should the ECHOmail scanner be run after each BBS call?NSelect message editor type: DROP or PUSH; If you don't understand, use DROP.BShould the crashmail event be re-started after leaving the editor?:Should the echomail scanner be run after using the editor?5Would you like "Sound-effects" while using the editor8Default to "Private" when entering new NETmail messages?:Default to "Kill/Sent" when entering new Netmail messages?=Default to "Archive/sent" when entering new NETmail messages?JDefault to "XMail" when entering new NETmail messages? (Not recommended)=Select the default priority for new NETmail messages entered.)Would you like to default INSERT MODE ON?BWould you like to force INTERNATIONAL ADDRESSING for all messages?0Valid user names: <username>,<optional password>LEnter the tag for this event. (A tag is some arbitrary, unique identifier.))Do you wish for this event to be enabled?MEvents can either send MAIL, EXIT with an errorlevel or execute DOS commands.4Press any key (other than SPACE) to select ALL days.IPress any key (other than SPACE) to select the specified day of the week.AEnter the STARTING TIME for this event in 24-hour format. (HH:MM)?Enter the ENDING TIME for this event in 24-hour format. (HH:MM)5Enter the ERRORLEVEL or DOS command(s) for the event.:Enter the minimum number of seconds to wait between calls.:Enter the maximum number of seconds to wait between calls.5Do you wish to use "advanced routing" for this event?4Do you want the event to execute even if it is late?MHow many times should D'Bridge try to dial without success during this event?FWhat is the maximum number of mail sessions allowed during this event?IWhat is the maximum number of aborted sessions allowed during this event?GIf you wish to use an "alias" address for this event, specifiy it here.U
ASpecify "St. Louis" nodelists: <DIRECTORY> <BASENAME> <DIFFNAME>FYou may specify private nodelist(s) here by listing their pathname(s).HIf you are the "boss" for points, enter the name of your pointlist here.HIf you run a FAKE NET for your points, enter the NET number to translate1Specify which points are using the FAKE POINTNET./Do you wish to index the nodelist by User name?:Specify the name of an additional user list file (if any.)?Specify the NET/NODE number of your outbound gateway. (if any)FDo you wish to use the ZONEgates or dial international calls directly?CSpecify a list of ZONES:NET(s) to exclude from nodelist processing.MTranslates ZONE:NET to ZONE:NET - <original ZONE:NET> <translate to ZONE:NET>(Enter your country prefix here. (USA=1)LEnter your dialing prefix for no-cost (local?) calls. (USA-Leave this blank);Enter your domestic dialing prefix. (USA-Leave this blank);Enter your international dialing prefix. (USA-Usually 011)3Phone number override(s): <NET/NODE> <phone_number>-Baud rate override(s): <NET/NODE> <baud_rate>?Do you want your modem to answer EMAIL calls during this event?3Do you want to receive FAX calls during this event?LDo you want to route mail addresses to private/unlisted nodes to their host??Do you want to call CM systems, Non-CM systems or Both (C/N/B)AWould you like to scan ECHOmail areas at the start of this event?LDo you want the mail event to end when all outbound mail has been processed?CDo you want your system to process FILE-REQUESTS during this event?BDo you want your system to accept human callers during this event?HWhat is the cost a message may have and still be sent during this event?AWhat priorities are allowed to be sent? (Normal/Crash/Immediate)K<address_list> EXCEPT <address_list> (NONE/ALL/OURNET/OTHERS/MYHUB/MYNODES)0Enter a list of nodes to poll during this event.J(<address>/MYHUB/OGATE/MYBOSS) FOR <address_list> (or just ALL/HOSTS/HUBS)KEnter the DOS commands to execute each time mail is received in this event.U
>Communications port where modem is attached. (COM1-COM7 only)GMaximum BAUD RATE supported by your modem. (Initialized at this speed)HAnswer YES if your modem uses a fixed baud rate, NO for a variable rate.;Do you want to use the hardware "handshaking" CTS and RTS?<Enter the commands to send to your modem for initialization.FCommands to take modem offline (if any.) The default is dropping DTR.;Do you want to drop DTR after sending the offline sequence?JIf you want D'Bridge to answer the phone, specify the ANSWER command here.8The modem command for dialing at 300 baud (Usually ATDT)9The modem command for dialing at 1200 baud (Usually ATDT)9The modem command for dialing at 2400 baud (Usually ATDT)9The modem command for dialing at 4800 baud (Usually ATDT)9The modem command for dialing at 9600 baud (Usually ATDT):The modem command for dialing at 19200 baud (Usually ATDT)LEnter modem command to dial specific systems: <ZONE:NET/NODE> <dial command>5Enter a list of all modem responses that mean "RING."LEnter a list of connect responses: <Baud rate> <Modem response>|<BBS string>=Enter a list of all modem responses that mean "CALL ABORTED".MThe number of milliseconds to pause between each character sent to the modem.<The number of seconds to wait while dialing for a "timeout."ASpecify the hardware "CARRIER DETECT MASK" to use. (Usually 128)HWould you like to automatically initialize your modem every ten minutes?&Enter the text to substitute when the
key is pressed.'Enter the DOS commands to execute when
is pressed.U
AWhat password would you normally like to use when picking-up mail=System-specific session passwords: <zone:net/node> <password>LDo you want to ignore mail from systems that don't use the correct password?KDo you want to rename files received from systems without a valid password?EDo you want systems that are NOT in your nodelist to be able to call?:Do you want to accept file-requests from unlisted systems?@Specify a time-limit for file-requests if desired. (in minutes)HSpecify a maximum number of Kilobytes (K) for file-requests, if desired.@Specify a maximum number of files for file-requests, if desired.ADo you wish to check these limits BEFORE or AFTER a file is sent?:Do you wish to enforce these limits over a 24-hour period?;What is the minimum baud rate for processing file-requests?JFunction requests: <requestfile> <outputfilelist> <DOS command> (See DOCs)MExternal gateways: <nn/nn/...> <command to spawn> (See DOCs; use hex values)K<address_list> EXCEPT <address_list> (NONE/ALL/OURNET/OTHERS/MYHUB/MYNODES)ADaytime cost per minute for "local" calls. (Zero for most areas)HDaytime cost per minute for "domestic" calls. ("Ma Bell" averages $.30)2Daytime cost per minute for "international" calls.NPhone rate overrides: <prefix> <1st.min.cost> <2nd.min.cost>...<addl.min.cost>@Specify the discount rate-codes allowed <discount%> <rate name>FEnter the discount matrix data. UP/DOWN/LEFT/RIGHT, Rate code-lettersU
2 N j
0 M j
!5!R!o!
" "<"X"n"
-3-O-k-
.6.R.n.
///J/q/
0:0V0r0
1,1D1Y1i1Q9v9
:::V:r:
;2;Y;u;
<9<U<
='=<=L=aC
D/DKDgD
E+EGEcE~E
F/FGFLFVFlF
FRLwL
M;MWMsM
N'NCN^NyN
Hold all mail
View/Modify queue
Rebuild queue
Poll a node
Transmit file(s)
File-request
Information display
Select alias
EDITOR
Read/edit EMAIL
Setup editor parameters
Local/ECHOmail areas
Keyboard macros
Translation table UTILITIES
History display
Request ECHOmail link
New ECHOmail link
Terminal mode
Force nodelist compile
Process ECHOmail
Display schedule
Don't display schedule
FAX Control Menu
CONFIG
Basic configuration
Directory paths
Install new modem
Comm/modem setup
FAX configuration
Schedule maintenance
Nodelist configuration
Packet/Mail control
XMail control
ADVANCED
Function keys
BBS configuration
Security/Miscellaneous
Disk space minimums
Output configuration
Accounting/Translation
New support system
ZMODEM parameters
Window colors
Leave D'Bridge
DROP to DOS
PUSH to DOS
Main:PUse the ARROW keys to select the desired option, then press ENTER. ESC-Finished
ARROW
ENTER
EDITOR
Setup editor parameters
Local/ECHOmail areas
Keyboard macros
Translation table
CONFIG
Basic configuration
Directory paths
Install new modem
Comm/Modem setup
FAX configuration
Schedule maintenance
Nodelist configuration
Packet/Mail control
XMail control
ADVANCED
Function keys
BBS configuration
Security/Miscellaneous
Disk space minimums
Import/Export setup
Accounting/Translation
ZMODEM parameters
Leave SETUP
SETUP:PUse the ARROW keys to select the desired option, then press ENTER. ESC-Finished
ARROW
ENTER
DBEDIT.INV
Loading editor...
dbedit INTERNAL
+dbedit INTERNAL
DBFAXL
DBRIDGE.RSNU
>7MEul
>7MPuE
& A \ w
SWITCH SETTINGS FOR:
Switch
KVerify that the switch settings are correct, then press any key to continue
Installed:
PI:%Pre-programming modem... PLEASE WAIT!
Pre-programming modem
Error pre-initializing modemU
MODEM SELECTION
INSTALL NEW MODEMLSelect modem type using the arrow keys; press ENTER to select, ESC to cancel
ENTER
MODEMS.SEL
Unable to open MODEMS.SEL
8 m v
Help Alt-H
Log
D'Bridge
1.30U
Exit terminal mode?U
---- Terminating connection ----U
-- Closing capture log --
CAPTURE LOG
Capture text to file: ** Unable to open capture log **U
Routine previously defined:9"DOS, EXIT or MAIL" must come after a routine definition:6Mail events MUST have both a starting and ending time:/A DOS commands must follow the "DOS" directive.
Unable to find routine:.A valid DOS errorlevel must come after "EXIT:"/"DYNAMIC" is only allowed with "MAIL" routines:-Routine names may only be eight letters long:&POLL must follow a ROUTINE definition:#Unable to POLL a non-existant node:
Can't poll yourself:
Unable to create:'Out of memory - cannot save parameters:
Unknown # U
File not found?)Path not found. (a directory is missing?)9Too many open files. (increase to FILES=50 in CONFIG.SYS)AFile access denied. (Read-only or locked file?) Using a NETWORK?
Invalid file handle?
Attempted read past EOF.3Disk is completely full or bad file path specified.
File not assigned?
File not open?
File not open for input
File not open for output,Corrupt DBRIDGE.PRM detected; re-run IMPORT.1Stack overflow. Report this problem immediately!DWorkRAM overflow; Increase maximum memory and workram. Run DBSETUP.
Invalid pointer?
Floating point overflow?
Overlay manager not installed?HOverlay manager file-read error. Run INSTALL option F5, integrity check.
Non-standard error #
ERROR:
D'Bridge fatal error:U
"Unable to create NEWecho directory#Unable to add another QuickBBS area
Area automatically added
Adding ECHOmail area:
(<Fuc
L<QuH
xxxxxxxx.PKT
Sysop
D'Bridge AREAFIX
INTL
TOPT
FMPT U
AREAFIX password problemEYou have attempted to make an AREAFIX request from a D'Bridge system 2without the proper password. You have specified "
" which is not valid.
Please contact the system operator of
for more information.
--- D'Bridge 1.30
DBRIDGE.XMA
Bad AREAFIX password "
" for U
D'Bridge Unpacker OFFLINEU
ECHOMAIL.CTL
D'Bridge ECHOscan OFFLINEU
$D'Bridge valid command line options:
SETUP
Invokes setup mode
Invokes terminal mode
UNPACK
Unpacks incoming mail packets
ECHOSCAN
Performs an ECHOmail scan
INSTALL
Re-installs D'Bridge completely
IMPORT <configfile>
Imports a configuration file
EXPORT <configfile>!Exports the current configurationARunning DBMAILER with no options is the normal mode of operation.U
#This site has violated its software#license agreement by using the same%serial numbered KEY file on more than$one machine. This computer has been$used to comminicate with a duplicate#license key. Please re-import your'configuration to eliminate this messageU
- I e
!#!3!>!G!L!U!k!t!}!
"%"2"7"b"g"q"v"
$;$D$
$'%,%?%L%g%}%
&/&@&P&a&f&k&u&
';'T'Y'c'h'v'
(4(F(
(&)>)R)f)z)
*+*8*B*W*d*n*
* +#+}+
+U,j,
-2-J-T-
.1.J.c.t.~.
/2/=/G/
1.181B1L1V1k1y1
252L2Q2[2f2n2s2~2
3 3+393L3X3]3j3o3z3
4$434<4
6"656H6[6n6
7$7+7>8P8Y8h8q8
+Mail was received; Executing DOS command(s)
1.MSG
NOECHO
D'Bridge 1.30;Ignore this message; used for internal ECHOmail processing.
NOECHO
Quickbase:
MSGHDR.BBS
DBRIDGE.PTR
Z$ < t
DBRIDGE.RSE%ECHOscan not possible; low disk space
Not enough memory for ECHOscan
B-*.*
ECHOMAIL.CTL
*NONE*
Scanning ECHOmail areas
ECHOscan: Press ESC to cancel
-- Scanning ECHOmail --
Area:
Message:
Scanned:
Forwarded:
System:
DBRIDGE.AA1
DBRIDGE.AA2
Unable to scan Quickbase!ECHOmail scan aborted by operator(ECHOmail forwarding aborted - disk error,ECHOmail forwarding aborted - low disk space
DBNODEL
DBFAXL
No ECHOmail messages forwarded
message
area
forwardedU
AREA:
AREA:
Reading
DEBUG: Echo seek problem
>$] u&
BADECHO (dup)
BADECHO
Reading
.MSGU
\1.MSG
NOECHOU
AREA:
NETMAIL
Reading
DBRIDGE.EMW
UNPACK ERROR
FLAGS FIL
DBRIDGE.NMW
Via D'Bridge
* Origin:
SEEN-BY:
MSGHDR.BBS
Unable to create: U
D'Bridge 1.30;Ignore this message; used for internal ECHOmail processing.
NOECHO
1.MSGU
TEMP.FIL
&Unpacking not possible; low disk space
*.PKT
UNPACKING MAIL:
Do NOT disturb!
-- Unpacking EMAIL -- Packet: Area:
Message #: Unpacked:
Forwarded:
System:
DBRIDGE.AA1
DBRIDGE.AA2
NETMAIL
Reading
" Unknow type - ignored
AREAFIX
" Packet out of sync
DBRIDGE.XMA
Unable to read "
" ignored - bad password
JUNKMAIL
No messages received
AREAFIX request(s) received
ECHOmail message(s) forwardedU
' ; @ R h r
# B V
)!A!~!
"0"m"t"
#K#_#
#`%j%
&'&,&:&
')'8'J'
'L(^(
)/)C)W)k)
*4*A*K*^*h*y*
*X+u+
+(,x,
,)->-r-
.L.^.w.
/)/J/O/Y/
/E0J0j0s0x0}0
1'1@1J1a1f1k1
2(2-2S2X2]2y2~2
3!3&353N3S3^3w3|3
4,414@4
5-575N5S5X5n5x5
8A8J8Z8j8t8
9'9:9M9`9s9
:H:Q:_:r:
;$;3;S;^;m;
<8<V<
<>=q=v={=
=4>?>I>R>j>u>
?!?+?4?G?R?\?e?v?
?1@Q@Z@t@
A A*A/A7A<AaA
DBRIDGE.AFXU
Sysop
D'Bridge AREAFIX
ECHOmail status report
Following is a summary from ! of changes in ECHOmail topology:
DBRIDGE.AFX
) is now active for the following area(s):
** None **
ECHOmail area(s) active.
--- D'Bridge 1.30
DBRIDGE.XMA
Sysop
D'Bridge AREAFIX
ECHOmail availability
Following is a list from
of available ECHOmail:
5** No ECHOmail available for your security level **
ECHOmail area(s) available.
--- D'Bridge 1.30
DBRIDGE.XMA
DBRIDGE.DL46Date Time System Area Action
Added
Added/scanned
Removed
Violates security
Area listing
has been added.
added
DBRIDGE.REE
cannot be added - table full.
cannot be added - table full
has been removed.
" " removedU
AREAFIX request for
# is already active for your system.
is already active
has been added.
added
cannot be added - table full.
cannot be added - table full
has been removed.
" " removed. is not active for your system - can't remove.
is not active - can't remove# is not authorized for your system.